driver
Call Bridge
For use with Windows 7/8 / 8.1 / 10 64-Bit, the software version of the system must be relatively up-to-date to use the CallBridge V2 R3.15.0 : (2000er, 4000er series and F900 = min. V. 2/3000 series and F200-F650 min. V. 7). If your system has an older software version and you are using Windows 7 64-Bit, you can install CallBridge V2 R2.2.0. The constellation is not officially released, but works in 99% cases. For use with Windows 8 / 8.1 / 10 64-Bit you may have to update your system!
Use the CallBridge V2 R2.2.0 only for Windows 7 64-bit systems, if the system does not have a current software version.
| version | date | operating systems | download |
|---|---|---|---|
| V2 R3.15 | 04.10.2019 | Windows XP Windows Vista 32bit Windows Vista 64bit Windows 7 32bit Windows 7 64bit Windows 8 32bit Windows 8 64bit Windows 8.1 32bit Windows 8.1 64bit Windows 10 32bit Windows 10 64bit windows 11 | Download |
| V2 R2.2.0 | 08.10.2010 | Windows 7 64bit | Download |
Informationen
Supported system telephones
The easiest way to upgrade your PC with CTI is to use a USB / LAN / V.24 cable between your phone and PC. Very important here is the telephone system: This decides whether it is possible and based on the installed firmware, which Callbridge version you can use.
Which system phones from Siemens and Telekom can be used can be found in the list.
Basically, if you operate Windows with 64-bit, the latest firmware should always be installed on the PBX. If this is not the case, there are still ways to enable CTI. We are happy to advise you by phone on the subject on +49 (6422) 89800-50.
Manuals, documentation and additional downloads
Currently no additional downloads available.
TAPICall
- Install the TAPI driver and if necessary configure it in the "Control Panel" under "Phone and Modem" in the "Advanced" area.
- Download TAPICall and run the installation file. The installation file is also located in the above TAPI driver download (filename TAPICall-10002.msi)
- Select the installed driver in TAPICall.
- Work effectively and quickly. Here is an introductory video to the main features of TAPICall.
Hints
Start the setup file of the TAPI driver you downloaded and follow the user guide. After completing the installation, it may be necessary to restart the computer. Some download files contain several TAPI drivers. Please pay attention to the selection of the driver suitable for your device. If the connection is made via USB, first install the USB driver of the device and then the TAPI driver.
We assume no liability for the completeness, function, scope or compatibility of the drivers provided above for download. Source and originator unless otherwise stated is the manufacturer of the hardware / device. TAPICall is our product, which is included in the download. If you have any questions about the drivers in connection with TAPICall, call: +49 (6422) 89800-50